Schlieren成像和声场可视化

Schlieren技术是利用声场引起透明媒质光折射率的变化而实现声场可视化的光学成像技术。它具有对声场无干扰、快速、瞬态成像的特点。本文利用二维光学Fourier变换分析了Schlieren技术的成像原理,在采用连续激光和高速ICCD的Schlieren成像系统中,实验研究了平面波声场和线聚焦声场中换能器光学校准方法和声压的定量检测技术。发展声场瞬态和动态成像技术,观测了声波的聚焦过程和固-液界面的声场分布和变化。这些结果表明Schlieren技术是一种有效的声场可视化和定量检测的光学成像技术。     

压电声透通信的研究进展*

由于电磁屏蔽效应,传统的无线通信技术受限于金属障碍物的遮挡而无法应用。压电声透通信能够克服电磁无线通信方式的这一缺陷,在不破坏金属障碍物物理结构的前提下,通过声波穿透障碍物实现通信。本文在介绍金属隔物通信的基本原理和实现方式的基础上,总结阐述了压电声透通信目前国内外的研究进展,包括传输系统模型的建立、参数的设计、系统的搭建以及该技术中独特的能量传输方式,最后对影响压电声透通信系统性能的因素进行了分析。     

Rapid Determination of Dimethoate with a Surface Acoustic Wave Impedance Sensor System

Abstract

Based on the principle of enzyme inhibition, a novel and sensitive lipase biosensor to determine organophosphorus pesticide is presented. Contact of the enzyme with pesticide samples results in specific inhibition of enzyme activity. Sensor calibration was possible by correlating the inhibition of enzyme activity with various concentrations of pesticide compound in a buffer solution. The sensor was successfully used to determine pesticide concentrations ranging from a low of 167ng/ml to 1.34μg/ml, and the detection limit is 81ng/ml. The effects of temperature, pH value, incubation time and solvent were also investigated. The sensor was also applied to the determination of dimethoate residues in the peel and flesh of tomato.     

被测体材质对电涡流位移传感器特性的影响

本文通过对电涡流传感器的位移特性实验分析不同被测体材料对于传感器输出特性的影响     

基于电阻应变式传感器实验内容的设计优化

本文结合教学实践介绍电阻应变式传感器实验内容的优化设计,并谈了自己在改进时的目的和体会.     

超高频振动下的三点弯曲实验装置的设计与制造

超高频振动下材料的力学行为不同常态．为了研究超高频振动对材料断裂韧度的影响,本文设计并研制了一套超高频振动下材料的三点弯曲实验装置．设计的内容包括超声波换能器,超声波变幅杆,夹具等,并对Ｔ７钢进行了三点弯曲实验,得到了新的断裂韧度值．     

Tb_1-_xDy_x(Fe_1-_yMn_y)_(1.95)合金的磁致伸缩和声学性质及在水声换能器中的应用

研究了Ｔｂ１－ｘＤｙｘ（Ｆｅ１－ｙＭｎｙ）１．９５合金的磁致伸缩、声学等性质及其在水声换能器中的应用。当外加的磁场强度≥８００ｋＡ·ｍ－１时,磁致伸缩系数值在（１３００～１８００）×１０－６范围,有效机电偶合系数值０８４～０９３,声速为２１６８～２８５６ｍ·ｓ－１,杨氏模量为（５０６～７２６）×１０１０Ｎ·ｍ－２;用合金棒材研制水声换能器,该换能器总长３００ｍｍ,总重２ｋｇ,其共振频率为２４ｋＨｚ,发射电流响应１７３ｄＢ,频宽１ｋＨｚ,电声效率４５％     

An oscillator using high order Lamb wave modes

An oscillator using high order Lamb wave modes is presented. Due to the multimode property of Lamb waves, high frequency oscillators using high order mode Lamb waves can be fabricated. To select the operating mode of the Lamb wave oscillator, a high order mode selector is inserted into the feedback loop. An oscillator using the 13th antisymmetric mode (a₁₃) in Lamb wave is achieved in experiments and the oscillating frequency is 5.30 times higher than that of the a₀ mode excited by the interdigital transducer.     

Advantage analysis of PMN-PT material for free-flooded ring transducers

The acoustic radiation characteristics of free-flooded ring transducers made of PZT4 and PMN-PT materials are calculated and compared.First,the theoretical formulae for free-flooded ring transducers are studied.The resonant frequencies of a transducer made of PZT4 and PMN-PT materials are calculated.Then,the transmitting voltage responses of the free-flooded ring transducers are calculated using the finite element method.Finally,the acoustic radiation characteristics of the free-flooded ring transducers are calculated using the boundary element method.The calculated results show that the resonant frequencies of the free-flooded ring transducer made of PMN-PT are greatly reduced compared with those made of PZT4 with the same size.The transmitting voltage response of the transducer made of PMN-PT is much higher than that of the transducer made of PZT4.The calculated 3-dB beamwidth of the acoustic radiated far-field directivity of the free-flooded ring transducer made of PZT4 at the resonant frequency 1900 Hz is 63.6 and that of the transducer made of PMN-PT at the resonant frequency 1000 Hz is 64.6.The comparison results show that the free-flooded ring transducer made of PMN-PT material has many advantages over that made of PZT4.The PMN-PT is a promising material for improving the performance of free-flooded ring transducers.     

A new algorithm for spatial impulse response of rectangular planar transducers

Previous solutions for spatial impulse responses of rectangular planar transducers require either approximations or complex geometrical considerations. This paper describes a new, simplified and exact solution using only trigonometric functions and simple set operations. This solution, which can be numerically implemented with a straightforward algorithm, is an exact implementation of the Rayleigh integral without any far field or paraxial approximation. Additionally, a nonlinear relationship was also established for spatial impulse responses from two field points which share the same projection point on the transducer surface plane. By incorporating this relationship in the algorithm, the computational efficiency of spatial impulse responses and continuous fields is improved about 20-folds and 14-folds, respectively. This algorithm has practical applications in designing l-D linear/phased arrays, 1.5-D arrays and 2-D arrays, as demonstrated through numerical simulations with array transducers. Experiments were also conducted to verify the new solution and results show that the algorithm is both accurate and efficient. The application of this method may include development of ultrasound imaging system for hard and soft tissue nondestructive assessment.